Causes of Mold and Mildew and Prevention
Mold and mildew removal is important because it can cause severe damage to your home and your health. It can also grow very quickly. If you think mold is making you sick, you should have it tested. Mildew and mold can develop in your kitchen, bathroom, basement and walls. It can even get under your foundation. It can be expensive to remove, but even more expensive not to remove. However, you can get rid of it and keep it from returning.
Mildew prevention is fairly easy. The first thing you should do is to make sure that you have a clean environment. Having a clean environment means that you will get rid of all of the excess organic material. This includes cleaning off your shower curtains on a regular basis, and also cleaning your tile and grout. Make sure to wash your laundry as soon as it gets dirty and not leave it piled up to accumulate mildew. Also, you want to make your home a little bit drier. Mildew will only grow if the conditions for it are perfect. These conditions include the right temperature and the perfect level of humidity. If you cook, clean, do laundry, or take showers, you could be releasing 3 to 5 gallons of extra water into your air every day. The good news is you can reduce the humidity in your home a few different ways without having to bathe less frequently.
One way you can do mildew and mold removal is by airing out your home. This works great when the air outside is a lot drier than the air inside. Dry outside air will come through your house and pick up extra moisture and then leave. The result is that the moisture level in your home will decrease. You can do this a lot faster by using high-powered fans to move air in and out of your home. This is what a lot of people do in situations that follow their basement flooding or natural disasters such as a hurricane.
Another thing you can do for mildew removal or mold removal is to use your air conditioner. As air cools, it can’t hold as much moisture as warm air. As a result, the moisture in the air will condense, and you’ll have less humidity to deal with in your home.
If you are doing with areas of your home such as the basement or bathroom, it may be more practical to use a dehumidifier than an air conditioner. Most dehumidifiers work in the same way as air conditioning units. They will remove moisture out of the air and then return the air to its original temperature before expelling it. You can actually get a dehumidifier and set it so that you can control the level of humidity in your home. If you have reoccurring problems with mold and mildew removal, this may be one of the best ways in which you can do it.
There are essentially three different types of mildew. Powdery mildew and downy mildew, are the first two types that grow mostly outdoors. The third type of mildew grows inside of your home. It can also be referred to as mold because it is the by-product of the same fungus that causes mold. Mildew removal is necessary, especially if mildew has had a good opportunity to develop in damp, dry, and warm conditions. Mold removal is necessary in damp conditions as well. One of the best ways to get rid of mold and mildew is to use a dehumidifier.
By installing a hydrometer in your home, you can determine the level of humidity. You want to always keep the level of humidity below 50%. This will help prevent the rapid growth of mold and mildew in your home. Mold can typically grow under slightly colder conditions than mildew. Even though there are several different types of mold, mildew favors warm conditions where most other types of household mold favor cool conditions. Mildew can grow on almost any surface that has an organic component to it, such as clothing, wood, laundry, carpet, tile grout, leather, and even your shower curtains. The good news is that mildew is easy to prevent and also fairly easy to get rid of.
Mold Removal and Mildew Removers
There are several different kinds of mold and mildew removers you can use. The type of mold and mildew remover you want to use depends a lot on what you are actually ridding it from. There is an extensive list below of different items from which you may be interested in removing mold and mildew from.
Mildew Removal From Bathroom Shower Curtains
If you are removing mildew from a shower curtain, you should take the shower curtains off of the hooks, and soak them in a very diluted concentration of bleach and warm water. You should use about 1/2 cup of bleach to 1 gallon of water. Allow the shower curtains to soak for up to 30 minutes. This should remove mildew. Then wipe them off with a damp sponge and rinse them off with water.
If they only have a little bit of mildew on them, you can just clean them with a diluted concentration of vinegar and wipe them off with a sponge.
Remove Mildew from Clothes and Fabrics
As soon as you notice any type of problems with clothing and fabrics, it is a really good idea to start at once to remove mildew as soon as you can. By doing this quickly, you can reduce the damage that it can cause. Not removing mildew not only causes clothes to smell bad, but it can also discolor them and eventually cause them to rot if it has time to eat up the fabric. If you are dealing with laundry that is white or towels, you can typically get rid of the mildew very quickly by washing your clothes and adding a little bit of bleach to the load. Bleach is an effective mildew remover because it kills the fungus that causes mildew to occur. Another effective cleaning method that works with almost any type of mildew, is to just take it out and let it dry in the sun. The sun helps to kill the mold and the fungus, and also gets rid of the mildew smell.
If you have laundry that can be discolored or ruined by the bleach, consider using an oxidized bleach or a bleach with color guard in it for mold removal. If you are unsure whether or not it will damage your laundry, it is best to test it out with a little bit of laundry at a time to make sure that you are not going to ruin it. Another solution, is to use a weaker cleaning chemical such as vinegar. The vinegar will also disinfect and kill the mildew, but it will not do it quite as quickly as the bleach. So you may need to soak it for a half an hour in the washer before you start it. Be extremely careful with clothes that are delicate, and items such as spandex and silk, that cannot tolerate bleach. With these items, you may be better off using a little bit of soap and water and washing them out by hand.
Mildew Removal from Leather Items Such as Gloves and Shoes
With leather items, you do not want to use bleach as a mold and mildew remover. This is because bleach will damage the fabric. Rather, you can use a little bit of diluted alcohol to help you get rid of the mildew stains. You can also try using regular soap and water. If you are having a problem with leather shoes, and you wish to do mildew removal, you should clean them off with soap and a sponge, and then dry them and polish them. The polished layer will help protect them from future mold and mildew infestations. If your shoes are a bit smelly, it may be due to the same fungus that causes mildew to occur. If this is the case, you may need to do mildew removal In order to treat this, by a special shoe fungicide and spray your shoes out for two or three consecutive days. Also make sure to wash your socks in bleach to help get rid of the fungus. This will help you out a ton.
Mildew Stain Removal from Mattresses and Upholstery
If you are trying to do mildew stain removal for your carpets, mattresses, or upholstery, the easiest way to do this is to dry them out as soon as possible. If you can, move your mattress and upholstery into direct sunlight. This will not only dry out your mattress, but it will also start to kill the fungus and also help you to remove the odor and stain. Once it is dry, you want to take a brush and scrub off all of the mildew or mold spots as quickly as you can. This should help you get rid of the mildew stains. It also benefits to do this outside, because these spores can be airborne.
The next thing you can do for mildew removal and mold removal, is to clean it off with denatured alcohol. This can help to disinfect and kill the fungus that are there. Something that my wife and I do very often, to get rid of smells on our children’s mattresses, is to leave them out in the sun and also put baking soda on top of them. Let the baking soda soak up the smell for a few hours, and then vacuum it off. You can also use baby powder to help you do the same thing or even cornstarch. But I think the fastest way to get rid of smells and stains is to leave your mattress out in the sunlight for five or six hours. If you have fragile upholstery, you want to be careful that you do not use too much water to clean with. Also, you want to test a small area to make sure that when you’re cleaning with alcohol, you are not going to be damaging any of the fabric. As far as mold and mildew removal from carpets go, you can also use baking soda and rub it into the carpets and then vacuum it up. You can also use a carpet cleaner with a small amount of diluted bleach to clean and disinfect your carpets and to help you get rid of the fungus.
Importance of Mold and Mildew Removal
Removing mold and mildew is very important, because having them around your home in large quantities may pose some danger to your health and the health of your family. When you spot any mold and mildew growth within your home, you may think that these spots are so small that it’s nothing to worry about. However, mold and mildew easily proliferate and spread. If ignored, they can slowly overtake a large area of your drywall , your shower, or your kitchen. Clothes can be ruined because of too much mildew. Leaving mold and mildew to grow in your home can cause health issues for you and your family. If you have an existing lung condition, mold spores circulating around your home can make it even worse.
Don’t wait before it’s too late. The instant you notice the growth of mold or mildew, try treating them right away. The easiest stains to treat are those that have just started growing. You’ll have a harder time removing these stains when these stains have been left there for a long time. Before the problem gets worse, act on it as early as you can. It may also be a good idea to call a mold specialist if you’re not sure what to do. The earlier you act, the easier your problem gets fixed.